Kamis, 17 September 2015

Application:
Damper used to adjust the volume of air flow into a ducting system.
Accessories:
Damper actuator : motor, gear, manual adjuster.
Type:
Round Damper, Damper, Volume Conrol Damper, etc
Material:
We use  mild  steel  1.2mm with zinc chromate. For the special request available in Galvanized steel, stainless steel, aluminum, etc.
Dimension:
The size from (100x100)mm up to (2400x1200)mm or round damper

Non Return Damper 
Application:
Non  Return  Damper is one way air flow, used to  relief  air  through an exhaust fan and shut off while the fan stopped.
Accessories:
Adjustable   counter   weight   to   maintain  a  positive pressure of the room.
Material:
We use Extruded aluminum frame and aluminum  sheet for the  blade  with 0.6 mm thickness wall mounted NRD. Or mild steel  frame  and  galvanized iron sheet blade for duct mounted NRD.  
Dimension:
                                  The size from (150x150)mm up to (2400x1200)mm.


Fire Damper
Application :
Fire damper used to stop the air flow. In normal condition, the damper is held open by the fusible link. In case of fire, the fusible link will melt at 74o C and the damper close.
Material:
We  use  mild  steel  with 1,2 mm  thickness  and coated with zinc chromate.
Dimension:
The dimension could adapted with requirement 



OPPOSITE BLADE DAMPER SUS 304










Round Damper

























Application:
Diffuser used as the adjustment of air flow and to supply diffusers  of  isothermal, heated or cooled air installation which set on
appearance (e.g. Bank, Mall, Office, etc.) It is recommended that pressure reduction box be used with the diffuser.
Accessories:
Pressure reduction box, damper, etc.
Type:
Diffuser Perforated, Square Swirl Diffuser, Slot Diffuser, Round Swirl Diffuser, Round Diffuser, Exhaust Valve, etc.
Material:
We use Aluminum and steel as the material. Available in  natural  color  and  paint protection, the color as request.
Dimension:
The photos above show some shapes of diffuser which we produce and the dimension as request.


Application:
Jet diffuser used to supply air farther than side diffuser. It usually used in hall or ballroom (large room) which need farther air throw.
Material:
Zincalum 0,8 mm thickness electrostatic   powder   coating, or  anodize aluminum , stainless steel could be ordered.
Dimension:
The  dimension  and model vary as its capacity.comfortaireat.com

Address Our Office

PT. Comfort Aire Aneka Teknik
Address : Jl. Raya Cempaka Putih No.3, Bintaro, Kebayoran Lama, 12330, Jakarta, Indonesia
Phone : (021) 7402068
Phone : (021) 7491264/5
Fax : (021) 7355296
@ Email : aireducting@gmail.com

Blog Archive

Diberdayakan oleh Blogger.

Social Icons


Followers

Social Icons

Featured Posts

Comfort Aire Aneka Teknik

Comfort Aire Aneka Teknik
Logo

Our Website

Flickr Images

Popular Posts